Oil & Gas Industry

Gladiator Gas Monitoring Unit

https://www.ashecontrols.com/wp-content/uploads/2023/12/Gladiator-gas-monitoring.jpg
Features :
Up to sixteen-channel simultaneous monitoring of Gas levels.
16-bit microcontroller-based Central Controller card.
Each Channel card with independent 14-bit Microcontroller in modular configuration.
3 programmable Alarm set-points with Relay change-over contacts per Channel Fault
Relay output for Sensor Fault.
Bright 7-inch graphical touch-screen color display for calibration
Bar-graph displays to indicate gas levels of each channel.
Dedicated analog 4 to 20 mA DC retransmission for each channel.
Data communication on RS485 Modbus RTU protocol.
Stand-alone execution or compatible with PLC / SCADA.

Product Models

https://www.ashecontrols.com/wp-content/uploads/2023/09/GGM-8.jpg

Why you should buy:

Multifunction 8 Channel gas monitoring
24 Gases and 7 units in Menu
Configurable 4 relays per channel.

Gas Monitoring Unit, 8 Channel

GGM-8

8 channel monitoring and control of Gas Transmitters with 3-wire Sensor configuration
Easy configuration Menu with selection of 24 gases and 7 units.
4 Control Relay alarms per channel
4 to 20 mA DC retransmission signal for individual channels at 600 Ohms load driving capacity each
Channel mode selections - SKIP/DISABLE/LATCH/NON-LATCH/ACK
Power supply - 24 VDC
Ambient Temperature - 0 to 55 deg C.
https://www.ashecontrols.com/wp-content/uploads/2023/09/GGM-16.jpg
Multifunction 16 Channel gas monitoring
24 Gases and 7 units in Menu
Configurable 4 relays per channel.

Gas Monitoring Unit, 16 Channel

GGM-16

16 channel monitoring and control of Gas Transmitters with 3-wire Sensor configuration
Easy configuration Menu with selection of 24 gases and 7 units.
4 Control Relay alarms per channel
4 to 20 mA DC retransmission signal for individual channels at 600 Ohms load driving capacity each
Channel mode selections - SKIP/DISABLE/LATCH/NON-LATCH/ACK
Power supply - 24 VDC
Ambient Temperature - 0 to 55 deg C.