Portfolio

<h6>Series GGM</h6> The GAS DIGIGUARD is a multi-channel 19” Rack mounted Controller system that monitors the levels of up to eight or sixteen remotely mounted Gas Sensors. The instrument is a standalone system that can be operated independently, or can also be connected to a PLC or DCS through a RS485 communication port on Modbus RTU protocol.

<h6>Series ADM and CZ</h6> The ASHE ADM series Modbus Interface I/O modules are a range of micro-controller based Converters for Analog Inputs & Outputs and Digital Inputs & Outputs to RS485 Modbus Serial protocol. The ADM series instruments realize the signal acquisition between sensor and the host DCS.

<h6>Series SGR and ISGR</h6> The new Intelligent Vehicle Static Grounding Relay Model SPS-600 is an advanced microcontroller based Static Charge earthing device used in Terminal Automation Systems. The instrument acts as safety interlock, allowing initiation of the laoding/unloading process only after satisfactory grounding of static charge on the Tanker body. The SPS-600 provides a potential free control output for process interlocking along with bright LED based visual indication (Red: Fault and Green : Healthy) to show earthing status.

<h6>Series MAX and VZ</h6> The ASHE MAX Series Temperature Scanners are part of a range of fully configurable micro-controller based instruments with control outputs, offered in a highly compact, rugged and reliable execution. The instrument has six keys on the front panel, with which the operator can set the parameters and configure the instrument as desired.

<h6>Series JX-42</h6> The ASHE JX-40 and JX-42 are fully configurable micro-controller based Digital process Indicators with and without control outputs, offered in a highly compact, flame-proof execution. The instrument accepts an analog current loop signal or process sensor inputs and displays the process value which can be calibrated to the desired operating range.

<h6>Series CY</h6> The ASHE Series CY is a range of fully configurable microcontroller based universal Digital process Indicators & Controllers offered in a highly compact, rugged and reliable execution. The instrument has three keys on the front panel, with which the operator can set the parameters and configure the instrument as desired.

<h6>Series JM</h6> The ASHE Model JM-408 Digital process Indicator is a compact, rugged and reliable indicating instrument which is specifically designed for accurate process measurement applications.

<h6>Series TX</h6> The ASHE TX series of Signal Conditioners, Isolators, Transducers, Transmitters and Multipliers comprise a wide range of high quality and reliable instruments for the conversion, amplification, isolation and multiplication of analog and digital signals.

<h6>Series SAFE</h6> The CO-SAFE is a field mounted instrument used to monitor the level of Carbon Monoxide in the atmosphere in it's vicinity in a plant. The microcontroller based standalone system can be operated Independently, or can also be interfaced to a PLC or DCS through a RS485 communication port on Modbus RTU protocol.